🙏 BIG THANK YOU! 🙏

🔻 The year is close to its end and we are heading towards Christmas. Time to say Thank You to all our supporters.

🔻 First and foremost, without you this project would not have been so successful. (Next week we will publish some numbers 🤫)

🔻 We got many many donations this year and we would like to give a special thank you to our top 10 donors (total donations per donor for this year).

🥇 4.579,12 €
🥈 4.028,28 €
🥉 3.636,00 €
4️⃣ 1.925,20 €
5️⃣ 1.868,00 €
6️⃣ 1.687,20 €
7️⃣ 1.410,39 €
8️⃣ 1.358,62 €
9️⃣ 984,03 €
1️⃣0️⃣ 967,83 €

📌 And to the rest of 140 supporters:
Thank you so much for your big big support! No matter if you spend 5€ or 500€. You do not have to donate big money. You know that many bricks create a huge wall. And you are one brick in this wall. Every single cent helps to provide Ukraine with the support it urgently needs. 🙏

🔻 We as a community, as the defenders of the free world, we stand together and we will fight for our freedom! And this freedom is now defended by the Ukrainian armed forces which are supported by us.

⚠️ We would also like to express our special thanks to our partner channels, which have been very supportive in sharing the project so that even more people can get to know about our project and join us in our mission.

ℹ️Our partner channels:

- 155mm Channel 👍
- Intel Slava Ukraini 🆒
- Torchline 🔥
- Ukraine News Channel 😮
- Ukraine Journal 🔝
- Ukraine Café 😱

✏️ If you have any questions, leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

ℹ️Updatesℹ️

🔻it’s not all about bottles. Our focus extends beyond them. It’s also making sure each drone works flawless. To achieve that, we also print parts specially made for them so that they can fly in every condition.

🔻Thousands of these parts are needed. The factory in Ukraine is not able to print them in numbers they need. So they asked us to do the job for them.

🔻 Currently, we print approximately 100 pieces per day, which is sufficient to meet their daily demand of approximately 75 pieces. This allows us to exceed their requirements and enables them to redirect their limited energy to their most pressing needs.

✏️ If you have any questions, leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🎄Happy Christmas🎄

ℹ️ The intention of Christmas nowadays is love, giving, kindness, family, and community. It should be a moment for togetherness, gratitude, and hope that transcends faith, focusing on compassion, connection, and shared joy, even while navigating consumerism and social media pressures.

🔻 Today, however, we must also think of our soldiers in the trenches and ruins. Of the civilians who have to cope without electricity and water and celebrate Christmas by candlelight, wrapped up in thick jackets. A Christmas filled with fear of the dangers that come down from the sky.

🔻 Regardless of whether you are religious, whether you are Christian, Jewish, Muslim, or belong to another religion, we should all pause for a moment and think of the people in Ukraine.

🔻 We all long for peace. We long for an end to killing and destruction, and for peoples to be respected once again. We long for national borders to be respected and for us to treat each other fairly and respectfully once more.

🔻 We will fight for peace for as long as necessary. None of us wants war. None of us wants to kill. None of us wants to produce weapons of war. Unfortunately, however, we are being forced to do just that, and we will not stop until Ukraine and its people are respected again and the illegal invasion ends!

🙏 for all donors and for the donations we got on Christmas Eve. We all hope that you had a wonderful day. Thank you so much! 🙏

✏️ If you have any questions, leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

🔥 We have a new record! 🔥

📌 we would like to give a big big 🙏 to our new top donor!

Dear Mr. Anonymous:

Thank you for your 1000€ donation! We will use your money in the best possible way to achieve the best possible effect on the battlefield. The soldiers of Ukraine thank you from the bottom of their hearts! We are doing our best to decimate the invaders as quickly as possible so that they can no longer carry out their brutal attacks on civilians!

✏️ If you have any questions, leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

ℹ️Our Equipmentℹ️

🔻 recently, there was a question about what we use to produce parts for Ukraine. Well… we use 3D printers.

Which brand do you use❓

👉We use a brand which is available on the free market. You can buy it in nearly every online store or sometimes also in your workshop or super market.

Which kind of printer you use

❓

👉As already said, it’s a filament printer. It uses filament which is enrolled and sold in packs with a weight of 1kg per roll.

Can you tell me exact brand and model

❓

👉Well…. No we won’t tell our exact equipment.

Why

❓

👉First of all it really doesn’t matter. As long as the printers are printing, it doesn’t matter which brand or model you use. It must print fast and with a good quality. That’s it.
Secondly, It is our production secret. It is also a security issue, so we will not disclose any details.
However, you can still support us. We guarantee that your money will be spent exclusively on supporting the Ukrainians. That is our main goal and our motivation. To provide the Ukrainian troops with the best possible supply of 3D-printed components so that they can eliminate the Russian invaders.

✏️ If you have any questions, leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

ℹ️ Our Year 2026 ℹ️

🔖 We would like to give you a complete summary of what we have achieved this year:

ℹ️ some statistics:
• Small bottles produced: >10000
• Big bottles produced: >1000
• Stabilisers: ~ 760
• 1,5kg heavy gifts: 85
• Spare parts in general: ~ 960
• Days of printing: 340
• Days of resting: 25
• Total printing hours: ~ 50.000h
• Boxes full of parts sent: ~ 250

🔖These numbers only were not possible without your help. You are driving this project! And the whole team is saying "thank you" to every single of our donors.

In total, we have to say thank you 147 times. 🙏

THANK YOU FROM THE BOTTOM OF OUR HEARTS!

ℹ️ Some more statistics:
• 569 Donations
• 147 Different donors
• 69,66€ Avg/donation
• Highest single donation: 1000€

😮😮😮😮

Let’s hope that we are not forced to continue for much longer. The year 2025 was hard for Ukraine and its people. We want peace!

🇺🇦Our wish for 2026:🇺🇦

Get the fuck out of Ukraine! Fuck Russia, fuck Putin!
Leave us the damned fuck in peace!
Drive to fucking hell! And to all invaders we promise you: we make sure of it!💥

🛑

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you are convinced, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💥 Our products in use 💥

▶️ We invite you to watch our spectacular video. Our bottles are not only good looking, they are also highly effective!

🔜 However, the production is shifting very frequently. Small bottles 6 months ago, big bottles 3 months ago. Large bombs 4 weeks ago. Special equipment today and now it has shifted a little to even bigger ones with a greater 💥.
This has increased the radius of effectiveness. However, this has also increased the the weight and material usage for production. Unfortunately, we can’t give you exact details of what we produce at the moment. That’s OPSEC (Operational Security).

ℹ️Some statistics for the current production:

They currently use about 100-120 self-developed bottles per day. Success rate of stopping a single invader is about 25%. The larger bottle costs about 5€. This means: with only 20€ you can stop at least 1 invader! Your money can be directly converted into man stopping action!
If we compare it to artillery shells, it costs a fraction of those!

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you want to be a part of this, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

❓ Here is your confirmation ❗️

✔️ Once you've watched the video, no further words are needed to prove that we really do what we say we do. This is one of our small, hidden production facilities in Ukraine, where urgently needed parts are manufactured.

⚡️ Due to power outages, they’re running the production lines with small diesel generators. That’s why they can only make urgent parts. Anything that takes a long time to print can’t be manufactured.

🔴 To achieve our full potential, we require approximately €4,000 per month. This financial commitment is only feasible with a robust community that is continuously expanding.

🙏 We express our sincere gratitude for your invaluable contributions. Your efforts are truly commendable. 🙏

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 If you want to be a part of this, then please use the link to our PayPal donation page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

👀 You paid for it! 👀

📌 Last week we asked if you want to send some sweets to Ukraine. A moral boost for the hard working defenders. And now we are filling up our boxes with some tasty yummy chocolate bars.

🍫 Which one would you pick?

🤫 Have you noticed the tiny printed parts? Well… that’s a secret development. So …psssst…. Don’t tell 😉

😂 Just joking. It is a call from our brigade. They do not have enough capacity to print them on their own so we were asked to print for them. All we know is that these parts are needed for something that makes 💥

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦

💥 Big boom from above 💥

👍 Take your time, watch the video. It’s speaking by itself. This is what they deserve by entering the country illegally! 🖕

✏️ If you have any questions, please leave a comment below. Or check out what we are actually doing (link) and who we are (link).

👍 Be a part of this project! Donate through our PayPal page down below:

📱 https://www.paypal.com/donate?campaign_id=DZZ83USDNQCV4

Let’s 🛑 together! Slava 🇺🇦